Foam Buddy (Firefighting Rucksack/Backpack Applicator)
Survitec Foam Buddy (Firefighting Rucksack/Backpack Applicator) — Portable backpack system for firefighting on helicopter decks, open decks, chemical/oil tankers and work vessels.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of foam tank/container appearance, density measurement, pH testing, microscopic examination for sludge/particulates per IMO MSC.1/Circ.1312 standards
Pressure gauge reading verification, manual safety valve actuation test, hydrostatic test of all pressure vessels per ASME standards, pressure relief accuracy testing
Annual proportioner flow test with calibrated mixing verification, foam generation test at actual discharge nozzles, comparison against baseline performance data
Visual examination under pressure (dry and wet tests), hydrostatic pressure testing of hoses per EN 854-1SC or equivalent, coupling engagement/disengagement cycle testing
Visual pattern observation during discharge test, foam stack height measurement (minimum 20m for HiFoam systems), expansion ratio calculation, blockage removal, nozzle spray uniformity assessment
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →