Japan RO Plant (1989)
Sasakura Engineering Co., Ltd. Japan RO Plant (1989) — Seawater desalination.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify actual permeate TDS (total dissolved solids) versus design specification; monitor salt passage rate periodically
Inspect pre-treatment effectiveness (sand filters, cartridge filters); check pressure differential across membrane stages; verify chemical treatment program
Monitor operating pressure (typically 55-65 bar for seawater RO); measure specific energy consumption (kWh/m³); check pump vibration and cavitation signs
Verify concentrate discharge flow rate and saline composition; ensure compliance with local environmental regulations; check reject water handling system
Inspect corrosion-resistant materials (titanium tubes, stainless steel); check spare parts availability; review maintenance history and replacement intervals
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →