JWP-36-C100
Alfa Laval JWP-36-C100 — fresh water generator for large ships and offshore installations, high capacity up to 100 m³/24h.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of titanium plate surfaces for salt crusting; measure heat transfer efficiency (temperature profiles before/after); perform pressure drop measurements
Non-destructive testing (ultrasonic measurements, infrared thermography); check surface roughness and discoloration; perform tightness test of plate sets
Inspect gasket for wear, embrittlement and loss of elasticity; perform leakage tests with compressed air or helium; check replacement if wear evident
Vacuum gauge measurement (should maintain 85-95%); condensate discharge check; ejector function test (pressure and flow); evaporation temperature check (should be 40-60°C)
Check and calibrate salinometer function; perform fresh water salinity measurement (should be <3 mg/l); visually inspect demister condition; test condenser discharge
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →