DPV
DESMI DPV — Vertical multistage centrifugal pump - fire-fighting, cooling, utility, irrigation, general service.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect mechanical shaft seal for visible leaks; check seal seat for flatness, cracks, and rubber parts for elasticity loss; measure clearance in seal chamber (typical max 0.4-0.5 mm radius)
Remove and visually inspect impeller for cavitation erosion, wear ring thickness, and dimensional changes; check exchangeable wear plates for scoring or material loss; verify impeller clearances meet specification
Monitor for cavitation noise during operation; inspect impeller inlet surfaces for pitting and erosion patterns; verify suction conditions meet NPSHreq at operating point; check inlet pressure exceeds NPSH requirement
Replace all sealing rubber rings during pump overhaul; inspect bearing clearances; verify bearing housing bolts for tightness; check for discoloration or hardening of rubber components indicating age/heat damage
For Modular S/SA/NSA: verify diffuser passages are clear and not clogged; check priming valve/check valve operation; inspect wear plate for cracks affecting diffuser principle function; test air-liquid mixture handling capability
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →