MAC-B Series (MAC-20B through MAC-110B)
Mitsubishi MAC-B Series (MAC-20B through MAC-110B) — Auxiliary steam generation for COPT-driven systems and inert gas applications on tankers, containerships, bulk carriers.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for cracks, corrosion, deformation, and water leakage; verify water-wall tube condition and tube thickness
Direct visual examination of headers and tubes; remote viewing (endoscope), Ultrasonic Testing (UT), or hydraulic pressure testing if visual access not possible; inspect supports, rolling stays, and uptakes
Annual safety valve testing; pressure gauge calibration; verify lift pressure and flow capacity; test protective devices including flame failure safeguards and fuel shutoff systems
Visual inspection of refractory lining for cracks, erosion, or spalling; verify burner alignment and flame pattern; check for soot accumulation and corrosion on combustion chamber walls
Inspect fuel filters and strainers for contamination; verify fuel pump operation and pressure; check atomizer condition; test fuel heater thermostat and temperature control; inspect fuel piping for leaks and corrosion
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →