DZ35-V1
Mitsubishi Kakoki DZ35-V1 — Vane Decanter Centrifuge - Enhanced large capacity with vanes.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of bowl interior for sludge deposits, disc wear, and separation disc integrity; check for discoloration, scaling, or corrosion on disc stacks
Verify oil bath and splash lubrication levels in bearing housings; inspect for dark or contaminated lubrication oil; check bearing temperature during operation (should not exceed 70°C); confirm oil seals prevent leakage
Check sludge discharge interval timer calibration (0-720 minute range); verify pilot valve mechanism for partial/total discharge capability; inspect discharge piping for blockages; monitor discharge pressure and flow
Monitor motor vibration and noise during operation; verify rotation speed accuracy; check electrical connections and control panel indicator lights; confirm motor power output meets specification; inspect coupling alignment
Verify feed pump discharge pressure (standard range 3-5 bar); check for cavitation noise; inspect pump impeller wear; monitor inlet pressure; verify pressure relief valve function; check piping for leaks
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →