UCD 536
GEA Westfalia UCD 536 — Dewatering industrial and municipal wastewater sludge, lowest power consumption.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Replace main and internal bearings every 15,000 operating hours; inspect for discoloration, noise, or abnormal heat; maintain weekly lubrication schedule; rotate bowl manually if idle
Monitor for leakage around bowl; inspect gasket condition visually; check for swelling caused by inadequate chemical flushing; replace gaskets according to maintenance schedule
Monitor differential speed between bowl and scroll; verify scroll conveyor condition for cracks or excessive wear; optimize differential speed based on application for maximum solids removal; inspect discharge nozzles for blockage
Verify stainless steel material integrity (304/316/duplex as specified); inspect for chlorine-based cleaning agent damage; use appropriate flushing procedures post-cleaning; test pH of cleaning solutions
Daily visual inspection for unusual vibration or noise; monitor bowl speed accuracy (critical for g-force consistency); check motor and gearbox alignment; assess belt condition on models with belt drives; verify VFD settings where applicable
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →