OWS Series (9 models, 1.5-20 GPM / 0.5-4.0 m³/h)
Hyde Marine Inc. OWS Series (9 models, 1.5-20 GPM / 0.5-4.0 m³/h) — Bilge water separator for marine vessels - gravity separation of oily bilge water.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of separator compartments; measure sludge level. Cleaning required when sludge reaches 25% of separator compartment volume or system reaches 75% retention capacity per IMO MEPC.107(49)
Test bilge alarm system by simulating high oil content; verify 15ppm alarm displays correctly and system triggers discharge block. Inspect sample line for flow obstruction
Internal inspection of all separation chambers, coalescers, and baffle systems; check for clogging, particle breakthrough, physical damage, or delamination. Verify internal seals and gaskets for degradation or loss of integrity
Inspect inlet condition for blockages or accumulated debris; verify unobstructed flow path. Check inlet strainer or screen condition
External visual inspection for corrosion, cracks, leaks, or previous spills. Pressure test if required by classification society. Verify structural condition at outlet and emergency discharge connections
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →