400 HW
Pusnes/Maritime Pusnes AS 400 HW — Mooring winch.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Render test - brake must hold at minimum 60% of Safe Diagonal Minimum Breaking Load (SDMBL). Oil, moisture, rust on lining can reduce capacity up to 75%
Visual inspection for wear, damage, contamination. Maximum allowable wear is 40% (residual thickness must be 60% of original). Measure lining thickness with calipers
Inspect proper cable winding on drum - improper winding reduces braking force by up to 50%. Check for kinks, fraying, or damaged sections along entire cable length
Verify working pressure approximately 250 bar (for Pusnes ring-main systems). Test fluid for contamination, water ingress, viscosity stability. Check all hoses for leaks, cracks, or excessive wear
Inspect enclosed primary gearbox for oil leaks, gear wear, bearing play. Verify oil-bath lubrication system functioning. Check for noise during operation indicating internal damage
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →