⚓ Working on this equipment?

Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.

No credit card required

🔧 9 verified suppliers & service companies for Rapp Marine/Rapp Hydema in the Maritime Network Find suppliers →

Rapp Marine/Rapp Hydema

AW-4800

Name: Rapp Marine/Rapp Hydema AW-4800
Brand: Rapp Marine/Rapp Hydema

Rapp Marine/Rapp Hydema AW-4800 — Hydraulic Anchor Windlass.

Components & Design

Component data being added…

Chain Size 2 inch

Nominal Pull 27,337 lbs @ 40 ft/min

Maximum Test Pull 41,005 lbs @ 60 ft/min

Type Hydraulic Driven

One free question — answered like a marine engineer. No account needed.

Brake System Functionality

Test braking action under full load; verify holding capacity and controlled lowering of chain/anchor

Hydraulic System Pressure

Pressure test at 1.5 times maximum working pressure; verify pump/motor output at rated specifications

Chain and Cable Condition

Visual inspection for wear, corrosion, kinks; certification of breaking strength per DNV/ABS standards

Hoisting/Lowering Performance

Run windlass under nominal load in both directions for 30 minutes minimum; verify smooth operation without slippage

Structural Integrity

Visual inspection of welds, fasteners, mounting brackets; check for corrosion, fatigue cracks, and proper grounding

Type-general inspection and maintenance points for this equipment category — not model-specific.

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Equipment Model #147157 · ✓ still in production