LEC2200
Techcrane LEC2200 — Ship/Deck Crane - Leg Encircling.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Annual thorough examination: inspect for fraying, corrosion, wear patterns; measure rope diameter loss; apply ISO 4309 discard criteria (including core loss, outer wire loss, inner wire loss)
Annual thorough examination: visual inspection for cracks in boom, pedestal, slewing bearing; measure corrosion/wastage depth; check bearing play; inspect bolt tension via torque wrench; document any deviations
Annual test: calibrate load indicators against certified scales across full range; verify emergency stop, limit switches, overload protection activate correctly; test windspeed cutoff if applicable
Quarterly/annual inspection: measure brake pad/lining thickness; inspect for excessive heat discoloration; check pawl/ratchet engagement and wear; test brake holding under full SWL at 125% load; verify no oil leakage
Every 5 years: perform certified load test to 1.25x SWL; measure slewing bearing radial and axial play; document results; verify no permanent deformations; update Certificate of Test and Thorough Examination
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →