"> Huisman Offshore Wind Installation Crane
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 8 verified suppliers & service companies for Huisman in the Maritime Network Find suppliers →
Is Huisman your company? Claim this page
Huisman

Offshore Wind Installation Crane

Huisman Offshore Wind Installation Crane — Wind turbine installation, monopile handling, offshore wind farm construction.

Components & Design

Component data being added…

Technical Data

Lifting Capacity Customizable per project requirements
Applications Turbine installation, foundation handling, component transfer
Primary Types Leg Encircling Cranes, Offshore Mast Cranes for wind projects
Market Focus Specialized for renewable energy offshore sector
Technology State-of-the-art deepwater capability

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Slew Bearing Degradation - tooth wear, raceway pitting, bolt looseness, and inadequate lubrication leading to compromised slewing accuracy and structural integr

Visual inspection for tooth wear and pitting; measure bolt elongation; perform grease sampling on large cranes; assess lubrication condition at specified intervals

www.yfm-crane.com/info/comprehensiv...
Wire Rope Deterioration - broken wires, internal/external corrosion (accelerated in marine environment), diameter loss, and lubrication degradation affecting lo

Count broken wires per ISO 4309; measure rope diameter loss; inspect for external and internal corrosion; verify lubrication status; conduct magnetic testing for internal wire degradation

www.connect-knkt.com/wire-rope-insp...
Load Hook Failure - cracks, deformation, wear exceeding 10% of original dimension, latch malfunction, and structural fatigue under cyclic loading

Visually inspect for cracks and deformation; measure wear at dangerous section (throat) against original dimensions; check safety latch engagement and clearance

marineinspection.app/article/ship-c...
Structural Boom/Frame Integrity - cracks, deformation, corrosion in main structural components (boom, pedestal, A-frame) reducing load-bearing capacity and safe

Visual inspection for cracks and deformation on boom and frame; assess corrosion extent; verify structural alignment and clearances; conduct non-destructive testing (NDT) on high-stress areas

marineinspection.app/article/ship-c...
Electrical/Hydraulic System Failures - fluid contamination, seal degradation, pressure loss, control system malfunction, and cable insulation breakdown compromi

Test hydraulic fluid for contamination and viscosity; inspect seals for degradation; verify system pressure and response; test electrical controls; inspect cable insulation and connections

www.ehs.washington.edu/resource/ove...

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Huisman?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #147045 · ✓ still in production