Tub Mounted Crane (TMC)
Huisman Tub Mounted Crane (TMC) — Heavy lift offshore operations, ultra-high capacity lifting.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for tooth wear and pitting; measure bolt elongation; perform grease sampling on large cranes; assess lubrication condition at specified intervals
Count broken wires per ISO 4309; measure rope diameter loss; inspect for external and internal corrosion; verify lubrication status; conduct magnetic testing for internal wire degradation
Visually inspect for cracks and deformation; measure wear at dangerous section (throat) against original dimensions; check safety latch engagement and clearance
Visual inspection for cracks and deformation on boom and frame; assess corrosion extent; verify structural alignment and clearances; conduct non-destructive testing (NDT) on high-stress areas
Test hydraulic fluid for contamination and viscosity; inspect seals for degradation; verify system pressure and response; test electrical controls; inspect cable insulation and connections
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →