WST-18
Wärtsilä WST-18 — Tugs, ferries, offshore vessels.
Components & Design
Component data being added…
Technical Data
Related equipment 10
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify steady-state and dynamic pressure within manufacturer specifications (typically 200-250 bar for steering systems) using calibrated gauges; document pump pressure drop vs. load
Visual inspection of hydraulic fluid level; check for discoloration, emulsification, or contamination; perform flow rate measurement during full port/starboard cycle
Verify pitch indicator alignment with actual blade angle using mechanical feeler gauge or laser measurement at multiple positions (0°, 35°, 70°); document hysteresis
Test valve linearity via ramp input (5% increments); measure response time <500ms; check null zone <2% spool displacement; inspect spool for scoring/stiction
Measure actual flow output vs. nameplate (swashplate displacement × RPM); perform case drain backpressure check; assess noise signature for cavitation or bearing wear
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →Need spare parts for this model?
We know 12+ companies supplying Wärtsilä WST-18. Tell us what you need — we obtain the quotations for you.