DPV15
DESMI DPV15 — Vertical multistage submersible centrifugal pump.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify stainless steel grades (AISI304/304L) and coating conditions; inspect for pitting, crevice corrosion, or galvanic coupling with dissimilar metals in marine environment
For DESLUBE/NDW: inspect double shaft seal and pressure booster condition; for DOP series: verify positive displacement screw geometry; for DesFuel: check magnetic coupling seal integrity and alignment
Measure bearing clearance every 1.2m shaft length (DESLUBE/NDW); inspect carbon bearings for wear; verify impeller dynamic balance; check for cavitation erosion marks
Verify pump inlet line configuration; measure actual inlet pressure; confirm sufficient head above pump inlet; inspect suction strainer for blockage; validate NPSH margin against pump requirements
For DESLUBE: verify 0-80°C operation limits; for DesFuel: confirm -165°C cryogenic capability; inspect thermal expansion effects on seals, casings, and intermediate pipes
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →