ROTAN GP Internal Gear Pump
DESMI ROTAN GP Internal Gear Pump — General duty internal gear pump for clean, non-abrasive fluids.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect mechanical shaft seals for weeping or spray pattern; verify seal type matches media (standard vs. special for high temperature); check coupling condition and vibration levels
Visual inspection of impeller blade surface for pitting, erosion, or material loss; measure impeller diameter wear and compare against design tolerance; assess suction-side NPSH adequacy
Monitor bearing temperature (infrared or contact), check lubricant level and condition (contamination, discoloration), listen for abnormal noise; verify bearing pre-load is correct
Check for galvanic corrosion between dissimilar metals; inspect stainless steel components for pitting or stress-corrosion cracking; verify seawater pump materials (bronze, duplex) are properly selected
Verify inlet suction strainer is clear of debris; check differential pressure across strainer; inspect foot valve (if present) for sticking; confirm priming capability of self-priming pumps
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →