AEB1E 550-1E
Allweiler AEB1E 550-1E — Marine Bilge, Large Vessel.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection and hardness testing of stator (Alldur, Perbunan, EPDM, Hyperlon); check for visible damage, discoloration, or dimensional changes
Measure rotor runout, thread pitch, and eccentric surface concentricity; inspect for wear grooves, corrosion pitting, or material loss
Check axial and radial shaft play with dial indicator; verify oil level and condition in bearing journals; assess seal surface wear patterns
Inspect coupling bolts for fastener torque loss and corrosion; verify flange parallelism and concentricity with dial run-out test
Record inlet and outlet pressure, flow rate, motor amperage, and bearing housing temperature; compare to baseline commissioning data
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →