"> Netzsch NEMO NM076
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 3 verified suppliers & service companies for Netzsch in the Maritime Network Find suppliers →
Is Netzsch your company? Claim this page
Netzsch

NEMO NM076

Netzsch NEMO NM076 — Marine bilge system, large vessel cargo transfer.

Components & Design

Component data being added…

Technical Data

Max Capacity Up to 1,000 m³/h achievable with stacked geometries
Pressure 6-48 bar standard operation range
Temp Range Marine spec: -40°C to +93°C
Joint Types S (standard), L (long), D (double), P (pump) geometry options
Duty Oil tanker residue/sludge, container ship bilge/wastewater

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Stator elastomer wear and material degradation from saltwater/chemical exposure

Visual inspection for hardening, cracking, swelling; micrometers for wall thickness reduction; material compatibility cross-check with cargo type (fuel, sludge, seawater ballast)

Mechanical seal leakage and loss of lubrication film on rotor (dry-running risk)

Leakage detection at shaft seal cavity; rotational drag test under no-flow priming; seal cartridge clearance verification with feeler gauge; lubrication film observation during low-speed commissioning rotation

Rotor/stator cavity clearance increase leading to reduced volumetric efficiency and slippage

Dial gauge measurement of rotor runout; comparison of current displacement (mL/rev) against datasheet baseline; pressure/flow curve trending over service life; bore diameter verification with precision calipers

Joint seal and fastener corrosion/galling under marine salt-spray and vibration environment

Visual inspection for white corrosion products on connection surfaces; thread-locking compound integrity check; bolt torque verification per maintenance manual; ultrasonic or visual crack detection of fasteners

Cavitation damage on rotor/stator surfaces from inadequate net positive suction head (NPSH) during sludge/bilge pumping

Visual pit/erosion pattern mapping on rotor tip and stator bore with borescope; suction line pressure gauge trending; prime-loss incident log review; stator replacement interval comparison vs. design baseline

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Netzsch?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #146100 · ✓ still in production