FCIP2 Series
Marzocchi Pompe FCIP2 Series — Full cast iron marine gear pumps, high durability.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Listen for abnormal gravel-like noise and high-pitched whining during operation; inspect gear tooth surfaces and bore walls for erosion pitting under borescope
Visually inspect shaft seal condition for cracks/wear; measure gland drip rate (should be steady drip, not continuous); perform pressure test at rated bar to verify seal integrity
Perform oil sample analysis for iron, copper, and tin content via ICP/ferrography; verify fluid viscosity and oxidation resistance; measure suction/discharge pressures against baseline
Monitor fluid inlet temperature continuously (must remain -10 to +80°C for standard; -20 to +110°C for Viton variants); verify 0.7-3 bar absolute inlet pressure is maintained
Verify flexible coupling alignment using straightedge or laser tool (no radial/axial force transmission allowed); inspect coupling wear and assess vibration signature at operating RPM relative to displacement class
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →