327A Series
Viking Pump 327A Series — Stainless steel ultra-heavy-duty - marine cargo, ballast.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
All pumps must undergo factory pressure testing at manufacture (typically 1.5x operating pressure). Documentation of these tests is required.
Inspection for scratches, pitting, or play in the internal tooth flanks and bearing surfaces. Tooth flank play should be within specification limits. This is critical for long service life and leak control.
Visual inspection of shaft seal (Packing Seal or Mechanical Seal depending on model). Inspection for oil/fluid leakage traces or damage. Particularly critical for sealless mag-drive models (8123A/8124A).
Test pump under typical operating conditions (rated pressure, rated speed). Abnormal vibrations or noises indicate internal damage or unbalanced impellers.
For marine applications: stainless steel models (127A/227A/327A/4227C) inspect for surface corrosion or stress corrosion cracking. Cast iron models require protective coating inspection.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →