BT 1
Kracht BT 1 — Marine low-speed transfer, bitumen, fuel oil.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of journal bearings, bearing bushes, and gear tooth surfaces for scoring, pitting, and wear patterns. Measure clearances with dial indicators.
Hydrostatic test at 1.5x operating pressure to detect O-ring and shaft seal degradation. Check for oil seepage at all wetted interfaces.
Pressure relief valve bench-test at rated displacement and validate against nameplate maximum pressure specifications for the KP/KF series.
Measure viscosity stability at 40°C and 100°C per ISO 3055 using samples from circulation tests. Verify oil type meets DIN 51524 Part 2/3.
Run pump at rated displacement and speed, measure sound pressure level at 1m and analyze vibration spectrum using accelerometers. Compare against marine noise class limits.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →