VH16N (Mark I)
Belliss & Morcom VH16N (Mark I) — Oil-free reciprocating air compressor.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect piston rings and rod packings for wear or scoring during every 6,000 operating hours; replace if clearances exceed specifications or visible damage present
Inspect and clean cylinder liners and cooling jackets every 3,000 operating hours to prevent heat exchanger fouling and maintain compression efficiency
Test discharge relief valves weekly for proper operation and pressure setting; inspect inlet valves and discharge valves monthly for leakage or blockage
Monitor control air quality via filters, dryers, and pressure-reducing valves monthly to prevent automation failures and water contamination in air lines
Inspect intercoolers and aftercoolers for scale buildup and internal blockage every 2,000 operating hours, particularly in hard-water regions; clean or replace as necessary
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →