L140
Hatlapa L140 — Air-cooled starting air compressor, two-stage, large vessels.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify effective oil/water separator operation; check for oil mist carryover via visual inspection of discharge line and moisture trap condensation; test separator drain functionality monthly
Check lube oil level daily via dipstick or sight glass; verify oil pressure alarm function; monitor oil condition and perform element renewal at 500 operating hours; drain and refill per maintenance schedule
Test relief valve weekly at design pressure (typically 30 bar); verify discharge pressure gauge operation (cocks open); test low-pressure and high-temperature alarms monthly; inspect fusible plug integrity
Inspect suction and delivery valves at 1,000 operating hours; verify intake air filter cleanliness and replace element at 500 hours; monitor discharge pressure vs. speed correlation; check for abnormal noise indicating valve sticking
Verify all cooling water line cocks are open before start; monitor water inlet and outlet temperatures; check water circulation pump operation; inspect for scale buildup in coolers and intercoolers; drain cooler sediment
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →