CGC-125
Hamworthy CGC-125 — Bilge, Ballast, Cooling Water, Fire, General Service.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of impeller surfaces for pitting, erosion, or mechanical damage; perform performance curve monitoring for flow/pressure degradation
Observe seal chamber for coolant/liquid weeping; monitor temperature at seal location; check for discoloration or mineral deposits indicating seal breakdown
Listen for abnormal grinding, squealing, or chattering sounds during operation; monitor bearing temperature using infrared thermometer; check for axial/radial movement
Monitor pump inlet pressure and suction line conditions; perform flow rate testing; check for vapor pockets or unusual vibration at pump inlet
Inspect external casing for pitting, rust bloom, or material loss; verify material certificate (Bronze, Duplex, Stainless Steel); measure wall thickness in critical areas
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →