BT-LV 80
Azcue BT-LV 80 — Vertical triple screw pump for large volume marine applications.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify mechanical seal assembly is properly installed, check for any signs of leakage around the shaft seal, inspect seal faces for corrosion or wear
Check impeller for solids deposits, verify semi-open impeller design (where applicable) for debris tolerance, confirm strainer/suction screen functionality
Verify rigid or flexible coupling is properly tightened, check for corrosion on coupling components, confirm shaft alignment using dial indicator
Inspect cast iron casing for pitting or corrosion, verify bronze/stainless steel options match intended seawater service, check wear rings for erosion
For self-priming models (CA, SP, MO, BR), test dry-run capability after 30-minute initial priming, verify foot valve/suction screen is not blocked, confirm NPSH requirements are met
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →