RVD-400
Heishin RVD-400 — Centrifugal pump for general marine circulation systems.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify pressure gauge readings against design specifications. For gear pumps (MGB, M, MA, MGA, TGB, MVB) check inlet/outlet pressure differential; for centrifugal pumps verify head performance curve compliance.
Inspect pump body, shaft seals, and bearing housings for oil seepage or residue. Check oil condition (color, clarity, viscosity) in lube oil lines. For bilge/sludge pumps (HP, RI series) verify shaft packing condition.
Auditory/vibration assessment during operation. Verify suction strainer cleanliness (visual/pressure drop check). Confirm inlet pressure above minimum required (typically 0.1-0.3 bar for positive displacement pumps).
Obtain oil samples from pump suction and discharge lines. Conduct particle count analysis (ISO 4406) and water content testing (Karl Fischer method) per ISO 3448 lube oil grade standard.
Dial gauge measurement of coupling concentricity (runout <0.05 mm typical). Check motor-to-pump base bolts for tightness. Verify shaft end float and radial bearing play within design limits.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →