CB
Hamworthy / Svanehoj CB — Marine bilge, cooling, ballast, engine room service.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visually inspect around the seal area for signs of seawater or bilge water leakage. Check for moisture or salt crystallization. Listen for unusual sounds indicating seal dry-running.
Listen for grinding/gravel sounds during pump operation. Visually inspect impeller blade surfaces for pitting. Check net positive suction head (NPSH) availability against pump curve requirements. Verify suction strainer is clean.
Manually test check valve closure (if accessible). Verify no water backflow. Inspect strainer basket for debris accumulation. Check valve should seal when pump is not running.
Visually inspect all visible hose sections for cracks, perishing, discoloration. Verify clamp tightness. Check connection points for seeping or spraying water. Press hoses for softness/degradation.
For automatic pumps with float switches: Manually operate float arm to verify smooth movement. Inspect for visible corrosion or deposits. Clean salt/debris from mechanism. Verify electrical continuity.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →