"> Steerprop SP-Sport 60kW
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Steerprop in the Maritime Network Find suppliers →
Steerprop

SP-Sport 60kW

Steerprop SP-Sport 60kW is listed as a marine stern thrusters / bow/stern thruster in the Bow/Stern Thrusters / Bow/Stern Thruster category. Equipment of this class is typically installed in the propulsion train, thruster room, shaft tunnel, or stern/bow structure where mechanical power is transmitted to the propulsor. Its shipboard purpose is to transmit or convert machinery power into controlled thrust for propulsion or maneuvering. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. The structured source data lists the following model-specific information: Leistung (kW) is listed as 60.0. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Steerprop SP-Sport 60kW
60.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 60
thrust kn 4.2
thruster type SP-Sport

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Bearing, seal, gear, coupling, or shaft wear from misalignment, contamination, or poor lubrication causes vibration, noise, temperature rise, or leakage
Lubricating-oil loss, contamination, or cooling failure causes high bearing or gear temperature and possible protective alarms
Propeller, blade, hub, or underwater damage from impact, cavitation, or fouling causes vibration, reduced thrust, or abnormal load
Hydraulic, electric, pitch-control, or actuator faults prevent correct thrust or blade-angle response
Foundation, alignment, or structural movement causes repeated coupling, bearing, or seal problems and abnormal vibration

Service & Maintenance

Trend vibration, bearing temperature, oil condition, leakage, thrust response, shaft or gear condition, and alarm history. Inspect couplings, seals, supports, control feedback, and accessible underwater components; exact alignment, clearances, and wear limits must follow class and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical spares include seals, bearings, coupling elements, filters, hydraulic seal items, sensors, solenoids, and model-specific control or lubrication components.
Equipment Model #143459 · ✓ still in production