OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Deck› Bow/Stern Thrusters› Bow/Stern Thruster› Voith VSP (Voith Schneider) 7000kW
Voith

VSP (Voith Schneider) 7000kW

Bow/Stern Thruster · Bow/Stern Thrusters

Technical data from manufacturer or class sources · not yet verified by a person
7000.0 kWPower

Voith VSP (Voith Schneider) 7000kW is listed as a Stern Thrusters / Bow/Stern Thruster within the Bow category. It is typically installed in a transverse tunnel or retractable/azimuthing installation near the bow or stern, with drive machinery inside the hull. Its engineering role is to generate lateral or vectored thrust for maneuvering, station keeping or low-speed handling. The source entry additionally records power 7000.0 kW. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Power (kW)7000
Thrust (kN)490.0
Thruster typeVSP (Voith Schneider)
Related models

Also in Bow/Stern Thruster.

Other models of the same equipment type, Voith first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect drive machinery, lubrication, seals, bearings, propeller condition, control feedback and electrical or hydraulic interfaces. Review oil condition, leakage and vibration trends and verify correct response to bridge commands. Exact wear limits and service settings must follow manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry approved seals, filters, sensors, control fuses, selected hydraulic or electrical service parts and other maker-recommended critical spares.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Voith equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMIGS-HydroAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like VSP (Voith Schneider) 7000kW
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Voith VSP (Voith Schneider) 7000kW — a part, a service call, a second opinion. Are you Voith? Claim this brand page.

Service engineer? Write the day report for this VSP (Voith Schneider) 7000kW in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.