"> Veth Propulsion VL-1000 880kW
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Veth Propulsion in the Maritime Network Find suppliers →
Is Veth Propulsion your company? Claim this page
Veth Propulsion

VL-1000 880kW

Veth Propulsion VL-1000 880kW is identified in the source list as a bow or stern thruster. It is installed in a transverse tunnel or other dedicated thruster position near the bow or stern and connected to the vessel's electrical or hydraulic power and control systems. Its purpose is to produce transverse thrust for low-speed maneuvering, station keeping or assistance during berthing. The source record provides a stated power of 880.0 kW, and the existing record note 'VL-1000, 880 kW, 61.6 kN thrust'. The thruster combines a motor or hydraulic drive, propeller, gearbox or direct-drive arrangement, seals and local or bridge control interfaces. The exact model designation and any source-listed power distinguish drive rating and thruster size from neighboring variants; refer to the manufacturer documentation for the exact figure.

Veth Propulsion VL-1000 880kW
880.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 880
thrust kn 61.6
thruster type VL-1000

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Propeller or tunnel damage caused by debris, impact or cavitation, resulting in vibration, reduced thrust or abnormal noise
●Gearbox, bearing or seal deterioration caused by lubrication problems, water ingress or wear, resulting in oil leakage, temperature rise or vibration
●Motor or hydraulic-drive fault caused by electrical, cooling or pressure problems, resulting in reduced output or inability to run the thruster
●Control or feedback failure caused by joystick, sensor, communication or wiring faults, resulting in unavailable or incorrect thrust command
●Cooling or ventilation restriction caused by fouling, blocked filters or fan failure, resulting in motor or drive overheating and protective trips

Service & Maintenance

Inspect accessible seals, gearbox or bearing lubrication, motor cooling, control equipment and electrical or hydraulic connections. Trend vibration, temperatures and operating current or pressure and investigate deterioration from normal maneuvering performance. Inspect tunnel and propeller condition during underwater or dry-dock surveys for fouling, damage and rope entanglement. Function-test bridge and local controls, interlocks and emergency stopping arrangements. Check for water ingress or lubricant leakage around shaft seals. Refer to the manufacturer documentation for the exact figure for oil specifications, clearances, thrust limits and survey criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep shaft or gearbox seals, filters, bearings, control sensors, cooling-fan or pump parts and manufacturer-recommended electrical or hydraulic components. Critical vessels may hold a spare drive or control module according to redundancy. Confirm exact parts from thruster model and serial number.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Veth Propulsion?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #143370 · ✓ still in production