OceanSphereENGINES
Library› Engine Room› Turbochargers› Turbocharger› ABB Turbocharging / Accelleron VTC 714

VTC 714

Turbocharger · Turbochargers

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠‍⁠​⁠‍‌​​‌‌‍‌‍​​

The ABB VTC 714 is a high‑capacity turbocharger designed for large 4‑stroke common‑rail marine diesel engines, delivering up to 12 MW of boost pressure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Frame Size714
Power max (kW)12000
Inspection

Inspector Detail

Common issues

  • Bearing wear (journal and thrust bearings) leading to increased clearances and vibration.
  • Fouling and erosion of compressor wheel and diffuser, reducing efficiency and air flow.
  • Fouling and damage to turbine blades and nozzle ring, causing reduced power and increased exhaust back pressure.
  • Oil leakage from bearing casing seals (labyrinth seals) or oil supply/drain lines.
  • Turbocharger surging, often due to engine load changes, exhaust system issues, or compressor fouling.
  • Exhaust gas leakage from casing joints, particularly between turbine casing and gas inlet/outlet.
  • Vibration dueance to rotor imbalance, bearing wear, or foreign object damage.
  • Failure of speed sensor or overspeed trip mechanism.

Inspection checklist

  • Check axial and radial clearances of the rotor shaft (bearings) against manufacturer's limits.
  • Inspect compressor wheel and diffuser for fouling, erosion, cracks, and foreign object damage.
  • Inspect turbine blades and nozzle ring for fouling, erosion, cracks, and deformation.
  • Verify oil supply pressure and temperature to the turbocharger, and check for oil leaks from the casing and lines.
  • Check condition of air filter elements and charge air cooler for cleanliness and integrity.
  • Inspect turbocharger casing for cracks, exhaust gas leaks, and tightness of mounting bolts.
  • Monitor turbocharger speed and vibration levels during operation, comparing to baseline data.
  • Check functionality of water washing system (if fitted) and ensure proper drainage.
  • Verify operation of overspeed trip device and speed sensor accuracy.

Service intervals

compressor_water_washing250-500 running hours (or as indicated by differential pressure)
turbine_dry_cleaning500-1000 running hours (or as indicated by performance drop)
bearing_inspection8,000-12,000 running hours
bearing_replacement16,000-24,000 running hours (or condition-based)
major_overhaul24,000-36,000 running hours (or every 3-5 years)

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

rotor_axial_clearance_new0.15 - 0.25 mm
rotor_axial_clearance_max_allowable0.35 - 0.45 mm
rotor_radial_clearance_new0.08 - 0.15 mm
rotor_radial_clearance_max_allowable0.20 - 0.25 mm
compressor_blade_tip_clearanceRefer to manufacturer's manual (typically 0.5 - 1.5 mm)
turbine_blade_tip_clearanceRefer to manufacturer's manual (typically 0.5 - 1.5 mm)

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete bearing cartridge (journal and thrust bearings)
  • Labyrinth seals (compressor and turbine side)
  • O-ring and gasket set for casing and oil lines
  • Oil filter elements (if external filter is part of TC system)
  • Speed sensor
  • Impeller nut
  • Nozzle ring segments (if applicable and replaceable)

Safety

  • High surface temperatures of the turbine casing and exhaust gas piping, posing burn hazards.
  • High-speed rotating components (rotor shaft, compressor wheel, turbine wheel) which can cause severe injury if protective covers are removed or during component failure.
  • Pressurized systems (exhaust gas, charge air, lubricating oil) which can release hot gases or oil if leaks occur.
  • Potential for hot oil spray in case of bearing seal failure or oil line rupture.
  • High noise levels requiring hearing protection in the vicinity of the operating turbocharger.

Class survey

Class surveyors typically review turbocharger maintenance records, including overhaul reports, bearing clearance measurements, and cleaning logs. They will physically inspect the external condition for leaks, excessive vibration, and general integrity. Verification of overspeed trip functionality (often witnessed during engine trials or by reviewing test records) and confirmation of critical spare parts availability onboard are also common checks. The surveyor will also confirm that the turbocharger is suitable for the engine's current classification and operating parameters.

Estimated lifetime: 24,000 - 36,000 hours before major overhaul (with proper intermediate maintenance)

Need this part?

Request a quote for this model.

Free of charge — send us your request for ABB Turbocharging / Accelleron equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Turbocharger.

Other models of the same equipment type, ABB Turbocharging / Accelleron first.

By manufacturer ABBMAN Energy SolutionsIHIMitsubishiABB Turbocharging / AccelleronKawasakiPBSTCummins Holset TurbochargersNapierMAN ES TurbochargingMitsubishi METGarrett Motion MarineVolvo Pentaengine.od / Other TurbochargersKBB TurboAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All ABB Turbocharging / Accelleron models More like VTC 714
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this ABB Turbocharging / Accelleron VTC 714 — a part, a service call, a second opinion. Are you ABB Turbocharging / Accelleron? Claim this brand page.

Service engineer? Write the day report for this VTC 714 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.