Main Engine 4-Stroke · Main Engines (4-Stroke)
The HiMSEN 8H27/38 is an 8‑cylinder inline four‑stroke main engine delivering 2 920 kW at 800 rpm, featuring common‑rail fuel injection and dual‑fuel capability (HFO/MGO) for Tier II emission compliance.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Lube Oil & Filter Change | 250-500 hours (or as per oil analysis) |
|---|---|
| Fuel Filter Elements (Primary/Secondary) | 250-500 hours |
| Common Rail Injector Overhaul/Replacement | 4,000-8,000 hours |
| Cylinder Head Overhaul (Valves, Seats, Springs) | 8,000-12,000 hours |
| Piston & Connecting Rod Overhaul | 12,000-16,000 hours |
| Turbocharger Minor Overhaul | 4,000-8,000 hours |
| Turbocharger Major Overhaul | 12,000-16,000 hours |
| Main & Connecting Rod Bearing Inspection/Renewal | 16,000-24,000 hours |
| High-Pressure Fuel Pump Overhaul | 8,000-12,000 hours |
| Cylinder Liner Wear (Max Taper/Ovality) | 0.6 - 0.8 mm (max allowable) |
|---|---|
| Piston Ring Groove Clearance (Axial) | 0.15 - 0.25 mm (new ring in worn groove) |
| Crankshaft Deflection (Max Deviation) | 0.05 - 0.10 mm (across all webs) |
| Main Bearing Clearance | 0.18 - 0.25 mm (max allowable) |
| Connecting Rod Bearing Clearance | 0.15 - 0.22 mm (max allowable) |
| Exhaust Valve Seat Recession | 0.8 - 1.2 mm (from original position) |
| Turbocharger Rotor Axial Play | 0.10 - 0.20 mm (max allowable) |
| Turbocharger Rotor Radial Play | 0.20 - 0.40 mm (max allowable) |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
The class surveyor will typically focus on verifying the engine's structural integrity, operational safety, and compliance with statutory regulations (e.g., MARPOL Annex VI for Tier II emissions). Key checks include: 1. Review of Engine Logbooks & Maintenance Records: To confirm adherence to manufacturer's service schedules and proper recording of operational parameters and alarms. 2. Crankshaft Deflection Readings: To assess alignment and bearing condition, usually required annually or biennially. 3. Safety Device Functionality Tests: Witnessing tests for overspeed trip, low lube oil pressure shutdown, high cooling water temperature shutdown, and emergency stops. 4. Cylinder Head & Piston Spot Checks: During major overhauls, the surveyor may request opening of selected cylinder heads or pistons for visual inspection of liners, rings, valves, and injectors. 5. Bearing Clearances: Verification of main and connecting rod bearing clearances during major overhauls. 6. Fuel System Integrity: Inspection for leaks, proper filtration, and compliance with HFO handling requirements. 7. Lubrication Oil Analysis Reports: Review of trends in wear metals, TBN, and viscosity. 8. Exhaust Gas Emissions Compliance: Verification of engine's Tier II compliance through documentation and potentially on-site checks of engine settings or exhaust gas monitoring equipment if fitted. 9. General Engine Room Condition: Cleanliness, fire-fighting arrangements, and proper lagging of hot surfaces.
Estimated lifetime: 60,000 - 80,000 hours before major engine rebuild or replacement, with proper maintenance.
Free of charge — send us your request for HiMSEN equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, HiMSEN first.
Tell us what you need for this HiMSEN 8H27/38 — a part, a service call, a second opinion. Are you HiMSEN? Claim this brand page.
Service engineer? Write the day report for this 8H27/38 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.