OceanSphereENGINES

7H27/38

Main Engine 4-Stroke · Main Engines (4-Stroke)

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠‌⁠⁠‌​‍‌​⁠‌‍‌‍​​
7Cylinders
270 mmBore
380 mmStroke

The HiMSEN 7H27/38 is a 7‑cylinder inline medium‑speed main engine delivering 2 555 kW at 800 rpm, featuring common‑rail fuel injection and Tier II emission compliance.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

ConfigurationL
Speed (rpm)800
Fuel TypeHFO/MGO
TechnologyCommon Rail Tier II
Inspection

Inspector Detail

Common issues

  • Common Rail injector nozzle fouling or failure leading to poor combustion, high exhaust temperatures, and increased fuel consumption.
  • High-pressure fuel pump (HPFP) wear or control valve issues, resulting in unstable rail pressure or fuel leaks.
  • Exhaust valve burning or seat wear due to HFO operation, leading to loss of compression and power.
  • Cylinder liner scuffing or excessive wear, often linked to poor lubrication, HFO quality, or piston ring issues.
  • Turbocharger bearing wear or compressor/turbine fouling, causing reduced boost pressure and engine performance.
  • Fuel oil system issues: purifier inefficiency, filter clogging, or water ingress, impacting injector longevity and combustion.
  • Vibration issues, potentially from coupling misalignment, worn dampers, or imbalanced rotating components.
  • Lubricating oil contamination or degradation, leading to bearing wear or increased liner wear.

Inspection checklist

  • Visual inspection for fuel, lube oil, and cooling water leaks around cylinder heads, fuel lines, and pumps.
  • Check Common Rail system for leaks, especially at high-pressure pipe connections and injector glands. Verify rail pressure sensor readings.
  • Inspect turbocharger for excessive axial/radial play, air filter cleanliness, and signs of oil leakage from bearings.
  • Monitor cylinder exhaust gas temperatures (EGTs) for balance and deviations indicating combustion issues or exhaust valve problems.
  • Verify crankcase pressure is within limits and oil mist detector is operational and clean.
  • Inspect fuel oil filters (duplex) for differential pressure and ensure proper operation of fuel heaters and purifiers.
  • Check lubricating oil pressure and temperature, and inspect filters for signs of metal particles.
  • Verify cooling water system pressures, temperatures, and expansion tank levels. Inspect for leaks or corrosion.
  • Test engine safety devices: overspeed trip, low lube oil pressure shutdown, high cooling water temperature alarm/shutdown.
  • General engine room cleanliness, condition of insulation, and absence of combustible materials near hot surfaces.

Service intervals

Fuel injector overhaul6,000 - 8,000 hours
Exhaust valve overhaul8,000 - 12,000 hours
Piston and cylinder liner inspection/overhaul12,000 - 16,000 hours
Connecting rod bearing inspection12,000 - 16,000 hours
Main bearing inspection24,000 - 32,000 hours
Turbocharger minor overhaul12,000 - 18,000 hours
Turbocharger major overhaul24,000 - 36,000 hours
High-pressure fuel pump inspection/overhaul12,000 - 16,000 hours

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Cylinder liner wear (max diameter increase)0.6 - 0.8 mm
Piston ring groove wear (axial clearance)Refer to OEM manual, typically 0.15 - 0.25 mm max for top ring.
Crankshaft deflection (max between adjacent webs)0.05 - 0.08 mm
Connecting rod bearing clearance (max)0.15 - 0.20 mm
Main bearing clearance (max)0.20 - 0.25 mm
Exhaust valve seat recession (max)1.0 - 1.5 mm (from original position)

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete fuel injector assembly (at least one per cylinder, or critical components like nozzle tips)
  • Exhaust valve spindle and seat ring (at least one set)
  • Full set of piston rings for one cylinder
  • Connecting rod bearing shells (upper and lower halves)
  • Main bearing shells (upper and lower halves)
  • High-pressure fuel pump element or repair kit
  • Turbocharger bearing cartridge or complete rotor assembly
  • Assorted O-rings, gaskets, and seals for cylinder head, liner, and fuel system

Safety

  • High-pressure fuel lines: potential for spray fires from leaks in the Common Rail system (up to 1800 bar). Ensure proper shielding and leak detection.
  • Hot surfaces: exhaust manifold, turbocharger, and uninsulated pipes pose burn hazards and fire risks. Verify insulation integrity.
  • Rotating machinery: flywheel, crankshaft, and turbocharger rotating parts. Ensure guards are in place and personnel are aware during operation.
  • Crankcase explosions: potential for oil mist accumulation. Verify oil mist detector operation and crankcase breather cleanliness.
  • Starting air system: high-pressure air (30 bar) poses rupture risk. Check safety valves, pipe integrity, and drain lines.

Class survey

Class surveyors will typically verify the engine's maintenance records and PMS compliance. Key checks include crankshaft deflection readings (usually annually), opening up main and connecting rod bearings at specified intervals (e.g., 24,000-32,000 hours for main, 12,000-16,000 hours for conrod) or by owner's request, and inspection of cylinder heads and exhaust valves. Safety devices (overspeed, low LO pressure, high CW temp) will be tested. The integrity of the fuel oil system, especially high-pressure lines and shielding, will be scrutinized for fire prevention. Starting air system components and safety valves will be checked. Overall engine room cleanliness, fire safety arrangements, and the operational condition of the Common Rail system will be assessed.

Estimated lifetime: 60,000 - 80,000 hours before major overhaul (e.g., crankshaft out inspection), with a total design life of 150,000 - 200,000 hours with proper maintenance.

Need this part?

Request a quote for this model.

Free of charge — send us your request for HiMSEN equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 4-Stroke.

Other models of the same equipment type, HiMSEN first.

By manufacturer MAN Energy SolutionsWärtsiläCaterpillarHiMSENMTUVolvo PentaYanmar Power Technology Co., Ltd.HanshinDaihatsuPielstickMaK (Caterpillar)Rolls-Royce / BergenCaterpillar MaKCumminsBaudouinAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All HiMSEN models More like 7H27/38
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this HiMSEN 7H27/38 — a part, a service call, a second opinion. Are you HiMSEN? Claim this brand page.

Service engineer? Write the day report for this 7H27/38 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.