OceanSphereENGINES

6LDC32

Main Engine 4-Stroke · Main Engines (4-Stroke)

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠‌⁠‍​⁠‌​‌‌‍⁠​⁠⁠⁠
3,180 kWPower
6Cylinders
320 mmBore
400 mmStroke
Daihatsu in the SpecCodex register — view brand page →

The Daihatsu 6LDC32 is a medium‑speed, six‑cylinder inline diesel engine delivering roughly 2 200 kW (≈3 000 PS) at about 720–750 rpm, primarily used as an auxiliary main engine for shipboard power generation.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

6DK-32 Rated Power3000 PS / 2206 kW @ 720 RPM (Skyline Ships verification)
Bore/Stroke Pattern320mm bore / 400mm stroke inferred but unverified for DK-32
Mean Effective Pressure (estimated)2.59 MPa (per DC-32e analogous design)
Piston Speed (estimated)9.6 m/sec @ 720 rpm
Design ClassMedium-speed marine auxiliary diesel engine
Fuel SystemMDO/HFO with fuel changeover capability
Cylinder Head AssemblyPressure-tested; requires assembly caution for intake/exhaust valves
ConfigurationL
Speed (rpm)750
Fuel TypeHFO/MGO
TechnologyCommon Rail Tier III
Power (kW)3180
Inspection

Inspector Detail

Common issues

  • Fuel injection pump tappet adjustment screw loosening (as documented for DK-32 series)
  • Exhaust valve burning or pitting, especially when operating on HFO due to high temperatures and corrosive elements.
  • Piston ring wear or breakage leading to increased blow-by, elevated crankcase pressure, and high lube oil consumption.
  • Fuel injector nozzle fouling or chocking, resulting in poor combustion, high exhaust temperatures, and potential cylinder overload.
  • Turbocharger bearing wear (axial/radial play) or compressor/turbine fouling, leading to reduced boost pressure and engine performance.
  • Cylinder liner scuffing or excessive wear, particularly at the top dead center reversal point, impacting compression and oil control.
  • Main and connecting rod bearing wear due to lube oil contamination, insufficient oil film, or misalignment.

Inspection checklist

  • Visual Inspection: Check for any leaks (fuel, lube oil, cooling water, exhaust gas), abnormal vibrations, unusual noises, and general cleanliness of the engine and surroundings.
  • Performance Parameters: Verify all critical operating parameters (L.O. pressure/temp, C.W. pressure/temp, fuel pressure/temp, exhaust gas temperatures per cylinder, turbocharger RPM/boost pressure) against normal operating values and logbook records.
  • Fuel System Integrity: Inspect high-pressure fuel lines for leaks, proper clamping, and integrity of double-walled piping (if fitted). Check fuel filter differential pressure.
  • Lube Oil System: Check lube oil level, pressure, and temperature. Inspect lube oil filters for differential pressure. Review recent lube oil analysis reports.
  • Exhaust Gas System: Inspect exhaust manifold and turbocharger for signs of leaks, overheating, or fouling. Observe exhaust gas color.
  • Safety Devices: Verify functionality of overspeed trip, low lube oil pressure alarm/shutdown, high cooling water temperature alarm/shutdown, and crankcase oil mist detector (if fitted).
  • Crankcase Inspection: Check crankcase relief valves for signs of leakage or damage. If possible, perform a visual inspection through inspection doors for abnormal wear or debris.
  • Foundation Bolts: Visually inspect all engine foundation bolts for tightness, signs of corrosion, or movement.

Service intervals

Daily/WatchVisual checks, log parameter readings, check fluid levels.
250-500 Running HoursFuel oil filter element replacement, Lube oil filter element replacement.
1,000-2,000 Running HoursFuel injector overhaul/replacement, Exhaust valve clearance check/adjustment.
4,000-6,000 Running HoursCylinder head overhaul (valves, springs, seats), Fuel injection pump inspection.
8,000-12,000 Running HoursPiston overhaul (ring replacement, groove inspection), Connecting rod bearing inspection.
16,000-24,000 Running HoursTurbocharger major overhaul, Main bearing inspection (on rotation).

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Cylinder Liner WearMax. 0.6% - 0.8% of bore diameter (e.g., 1.9 - 2.5 mm for 320mm bore) at the top ring reversal point. (Exact value is manufacturer-specific).
Piston Ring Groove WearMeasured by feeler gauge with new ring, typically max 0.15 - 0.20 mm clearance beyond new. (Exact value is manufacturer-specific).
Crankshaft DeflectionMax. 0.05 - 0.10 mm (depending on engine length and manufacturer).
Main/Crankpin Bearing ClearancesMax. 0.15 - 0.30 mm beyond new clearance. (Exact value is manufacturer-specific).
Exhaust Valve Seat WearPitting depth or width of contact surface exceeding manufacturer's specification (e.g., >1 mm depth).
Turbocharger Rotor Axial/Radial PlayExceeding manufacturer's specified limits (e.g., 0.15 mm axial, 0.25 mm radial for this engine size).

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete set of fuel injector nozzles or complete injectors (at least one per cylinder type).
  • Exhaust valve spindles and seats (or complete exhaust valves) for at least one cylinder.
  • Full set of piston rings for at least one cylinder.
  • Fuel oil and lube oil filter elements (sufficient quantity for several changes).
  • Main and connecting rod bearing shells (at least one set of each type).
  • Gasket and O-ring sets for cylinder head, fuel pump, and common overhaul points.
  • Turbocharger bearing cartridge or critical bearing components.

Safety

  • Crankcase Explosions: Risk from overheated bearings or pistons creating explosive oil mist; requires functional oil mist detectors and crankcase relief valves.
  • High-Pressure Fuel Leaks: Extremely flammable, can ignite on hot surfaces; requires double-walled piping, leak detection, and proper maintenance of fuel lines.
  • Hot Surfaces: Exhaust manifold, turbocharger, and cylinder heads pose severe burn risks; proper insulation and guarding are essential.
  • Rotating Machinery: Flywheel, coupling, and shafting present entanglement hazards; all guards must be securely in place.
  • Overspeed: Malfunction of governor or overspeed trip can lead to catastrophic engine failure; regular testing of overspeed protection is crucial.

Class survey

For a Special Survey (5-Year), the class surveyor typically checks: * Crankshaft: Deflection readings, main bearing clearances (opening at least 25% of bearings, including end bearings), visual inspection of journals. * Cylinders: Opening of at least 25% of cylinder units (pistons, liners, connecting rods) for measurement and inspection of wear. * Cylinder Heads: Opening of at least 25% of cylinder heads for inspection of valves, seats, springs, and fuel injectors. * Fuel System: Inspection of all high-pressure fuel lines, pumps, and filters. Verification of double-walled piping and leak detection systems. * Lube Oil System: Inspection of pumps, coolers, filters, and sumps. Verification of oil mist detector functionality. * Cooling System: Inspection of pumps, coolers, and piping. * Turbocharger: Opening for inspection of rotor, bearings, and casings. * Safety Devices: Full functional testing of overspeed trip, low L.O. pressure shutdown, high C.W. temp shutdown, and local/remote emergency stops. * Foundation: Inspection of engine foundation bolts and chocking for integrity. * Logbooks: Review of engine logbooks, maintenance records, and lube oil analysis reports.

Estimated lifetime: 60,000 - 80,000 hours before major component replacement (e.g., cylinder liners, pistons) or significant overhaul requiring engine removal/major disassembly.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Daihatsu equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 4-Stroke.

Other models of the same equipment type, Daihatsu first.

By manufacturer MAN Energy SolutionsWärtsiläCaterpillarHiMSENMTUVolvo PentaYanmar Power Technology Co., Ltd.HanshinDaihatsuPielstickMaK (Caterpillar)Rolls-Royce / BergenCaterpillar MaKCumminsBaudouinAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Daihatsu models More like 6LDC32
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Daihatsu 6LDC32 — a part, a service call, a second opinion. Are you Daihatsu? Claim this brand page.

Service engineer? Write the day report for this 6LDC32 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.