Main Engine 4-Stroke · Main Engines (4-Stroke)
The Daihatsu 6LDC32 is a medium‑speed, six‑cylinder inline diesel engine delivering roughly 2 200 kW (≈3 000 PS) at about 720–750 rpm, primarily used as an auxiliary main engine for shipboard power generation.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Daily/Watch | Visual checks, log parameter readings, check fluid levels. |
|---|---|
| 250-500 Running Hours | Fuel oil filter element replacement, Lube oil filter element replacement. |
| 1,000-2,000 Running Hours | Fuel injector overhaul/replacement, Exhaust valve clearance check/adjustment. |
| 4,000-6,000 Running Hours | Cylinder head overhaul (valves, springs, seats), Fuel injection pump inspection. |
| 8,000-12,000 Running Hours | Piston overhaul (ring replacement, groove inspection), Connecting rod bearing inspection. |
| 16,000-24,000 Running Hours | Turbocharger major overhaul, Main bearing inspection (on rotation). |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Cylinder Liner Wear | Max. 0.6% - 0.8% of bore diameter (e.g., 1.9 - 2.5 mm for 320mm bore) at the top ring reversal point. (Exact value is manufacturer-specific). |
|---|---|
| Piston Ring Groove Wear | Measured by feeler gauge with new ring, typically max 0.15 - 0.20 mm clearance beyond new. (Exact value is manufacturer-specific). |
| Crankshaft Deflection | Max. 0.05 - 0.10 mm (depending on engine length and manufacturer). |
| Main/Crankpin Bearing Clearances | Max. 0.15 - 0.30 mm beyond new clearance. (Exact value is manufacturer-specific). |
| Exhaust Valve Seat Wear | Pitting depth or width of contact surface exceeding manufacturer's specification (e.g., >1 mm depth). |
| Turbocharger Rotor Axial/Radial Play | Exceeding manufacturer's specified limits (e.g., 0.15 mm axial, 0.25 mm radial for this engine size). |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
For a Special Survey (5-Year), the class surveyor typically checks: * Crankshaft: Deflection readings, main bearing clearances (opening at least 25% of bearings, including end bearings), visual inspection of journals. * Cylinders: Opening of at least 25% of cylinder units (pistons, liners, connecting rods) for measurement and inspection of wear. * Cylinder Heads: Opening of at least 25% of cylinder heads for inspection of valves, seats, springs, and fuel injectors. * Fuel System: Inspection of all high-pressure fuel lines, pumps, and filters. Verification of double-walled piping and leak detection systems. * Lube Oil System: Inspection of pumps, coolers, filters, and sumps. Verification of oil mist detector functionality. * Cooling System: Inspection of pumps, coolers, and piping. * Turbocharger: Opening for inspection of rotor, bearings, and casings. * Safety Devices: Full functional testing of overspeed trip, low L.O. pressure shutdown, high C.W. temp shutdown, and local/remote emergency stops. * Foundation: Inspection of engine foundation bolts and chocking for integrity. * Logbooks: Review of engine logbooks, maintenance records, and lube oil analysis reports.
Estimated lifetime: 60,000 - 80,000 hours before major component replacement (e.g., cylinder liners, pistons) or significant overhaul requiring engine removal/major disassembly.
Free of charge — send us your request for Daihatsu equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Daihatsu first.
Tell us what you need for this Daihatsu 6LDC32 — a part, a service call, a second opinion. Are you Daihatsu? Claim this brand page.
Service engineer? Write the day report for this 6LDC32 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.