Main Engine 4-Stroke · Main Engines (4-Stroke)
The Wärtsilä 10W31 is a medium‑speed, inline 10‑cylinder, four‑stroke diesel engine delivering about 6 100 kW at 750 rpm, noted for its high power density and flexible fuel capability (HFO, MGO, biofuel and dual‑fuel LNG).
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Fuel Injector Overhaul | 6,000 - 12,000 running hours |
|---|---|
| Exhaust Valve Overhaul | 6,000 - 12,000 running hours |
| Piston Ring Renewal | 12,000 - 24,000 running hours |
| Cylinder Head Overhaul | 12,000 - 24,000 running hours |
| Turbocharger Overhaul | 12,000 - 24,000 running hours |
| Main & Connecting Rod Bearing Inspection | 24,000 - 36,000 running hours |
| Major Engine Overhaul | 48,000 - 72,000 running hours |
| Cylinder Liner Ovality/Taper | Typically 0.6 - 0.8 mm maximum deviation from nominal bore. |
|---|---|
| Piston Ring End Gap | Maximum allowable increase, often 2-3 times the new ring gap specified by manufacturer. |
| Main & Connecting Rod Bearing Clearances | Maximum allowable increase, typically 0.15 - 0.2 mm over nominal clearance. |
| Crankshaft Deflection | Maximum allowable deviation typically 0.05 - 0.1 mm across webs, depending on engine size and manufacturer. |
| Exhaust Valve Seat Recession | Maximum allowable depth, typically 1.5 - 2.0 mm from cylinder head face. |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
For the Wärtsilä 10W31, a class surveyor will typically focus on: 1. Documentation Review: Thorough scrutiny of engine logbooks, maintenance records, lube oil analysis reports, and previous survey reports to verify compliance with planned maintenance and operational parameters. 2. Crankshaft Deflection Measurement: Verification of readings against manufacturer's limits, typically required at specific intervals (e.g., every 12,000-24,000 hours) to assess crankshaft alignment and bearing condition. 3. Main & Connecting Rod Bearing Inspection: Opening up a representative number of bearings for visual inspection and clearance measurement, as per planned maintenance system or class requirements (e.g., alternating sets every 24,000-36,000 hours). 4. Cylinder Unit Condition Assessment: Endoscopic inspection of liners, pistons, and valves. Physical inspection during overhaul if due, focusing on wear, carbon build-up, and scuffing. 5. Safety Devices Functionality: Witnessing the testing of critical safety devices including overspeed trip, low lube oil pressure shutdown, high cooling water temperature shutdown, and emergency stops. 6. Fuel System Integrity: Close inspection of the common rail system for leaks, proper securing, and condition of high-pressure components, given the inherent risks. 7. Engine Performance Verification: Review of engine parameters (EGTs, boost pressure, fuel consumption, cylinder pressures) to ensure stable, efficient, and safe operation within design limits. 8. Emission Compliance: Verification of exhaust gas treatment systems (if applicable for specific installations) and records for compliance with IMO Tier III regulations.
Estimated lifetime: 48,000 - 72,000 running hours before major overhaul (design life often exceeding 100,000 hours with proper maintenance)
Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Wärtsilä first.
Tell us what you need for this Wärtsilä 10W31 — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.
Service engineer? Write the day report for this 10W31 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.