OceanSphereENGINES

6W32

Main Engine 4-Stroke · Main Engines (4-Stroke)

Technical data from manufacturer or class sources · not yet verified by a person​‍​‍⁠‌‌​​‌⁠⁠‍‍​​⁠⁠⁠‌
2,880 kWPower
6Cylinders
320 mmBore
400 mmStroke

The Wärtsilä 6W32 is a medium‑speed, 4‑stroke L‑configuration diesel engine delivering up to 2 880 kW at 750 rpm, featuring common‑rail direct fuel injection and turbo‑intercooling for high specific power.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Displacement per cylinder32.2 liters
Specific power output (inline)580 kW/cylinder (at 750 RPM)
Specific power output (V-config)500-420 kW/cylinder (W32GD: 405-420 kW/cyl)
Configuration4-stroke, non-reversible, turbocharged, intercooled, direct fuel injection
Valves per cylinder2 inlet + 2 exhaust
Cooling systemSeawater and freshwater cooling; charge air cooling via cooler
TurbochargerNapier 357 (common); Wärtsilä turbocharger safety package available
ComplianceIMO Tier II (MARPOL 73/78 Annex VI)
ConfigurationL
Speed (rpm)750
Fuel TypeHFO/MGO
TechnologyCommon Rail
Power (kW)2880
Inspection

Inspector Detail

Common issues

  • Injection pump fuel rack stickiness (as reported for HFO operation in power plants, potentially referring to control valve issues in the high-pressure fuel pump or legacy systems, leading to uneven cylinder loading or poor engine response).
  • Exhaust valve burning or seat wear, often exacerbated by HFO quality, high exhaust temperatures, or incorrect valve clearances, leading to loss of compression and power.
  • Cylinder liner scuffing or excessive wear, typically due to insufficient lubrication, cold corrosion from high sulfur fuels, or poor combustion.
  • Fuel injector nozzle choking, carbonization, or wear, resulting in poor fuel atomization, increased fuel consumption, high EGTs, and potential piston damage.
  • Turbocharger bearing wear (axial/radial play) or fouling of compressor and turbine blades, leading to reduced boost pressure, higher exhaust backpressure, and decreased engine efficiency.
  • Piston ring breakage, sticking, or excessive wear, causing increased blow-by, high lube oil consumption, and reduced cylinder compression.
  • Main and crankpin bearing wear, indicated by elevated lube oil temperatures, increased wear metals in oil analysis, or abnormal knocking sounds from the crankcase.
  • Common Rail system pressure fluctuations or sensor failures, impacting fuel injection timing and quantity, leading to unstable engine operation.

Inspection checklist

  • Monitor cylinder exhaust gas temperatures (EGT) for deviations greater than +/- 20°C from the average, indicating combustion imbalances or exhaust valve issues.
  • Perform daily visual inspection for any leaks (fuel, lube oil, cooling water) around the engine, especially high-pressure fuel lines and connections, and check for proper shielding.
  • Check turbocharger axial and radial play (monthly/quarterly) and inspect compressor/turbine blades for fouling, erosion, or damage.
  • Conduct regular lubricating oil analysis (wear metals, TBN, viscosity, water content) and cooling water analysis (inhibitor levels, chlorides) to detect early signs of wear or corrosion.
  • Record cylinder peak pressure and compression pressure (monthly/quarterly) to assess combustion efficiency and the condition of piston rings and liners.
  • Inspect fuel filters (daily/weekly) and monitor differential pressure; ensure fuel oil treatment plant (purifiers, filters) is operating optimally for HFO.
  • Listen for abnormal noises (knocking, rattling, squealing) from the crankcase, cylinder heads, or turbocharger, which can indicate mechanical distress.
  • Verify the functionality of all engine safety devices, including overspeed trip, low lube oil pressure shutdown, high cooling water temperature shutdown, and oil mist detector.

Service intervals

Fuel Injector Overhaul3,000 - 6,000 running hours
Exhaust Valve Overhaul6,000 - 12,000 running hours (depending on fuel quality and operating profile)
Piston Overhaul (rings, liner inspection)12,000 - 18,000 running hours
Turbocharger Overhaul12,000 - 24,000 running hours (depending on type and operating conditions)
Main & Crankpin Bearing Inspection24,000 - 36,000 running hours
Cylinder Liner Calibration12,000 - 18,000 running hours

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Cylinder Liner WearMax diameter increase 0.6 - 0.8 mm (measured at the top ring's TDC position)
Piston Ring Groove WearAxial clearance increase 0.1 - 0.2 mm (specific to ring type and groove)
Crankshaft DeflectionMax deviation between adjacent webs < 0.05 mm (refer to Wärtsilä's specific manual for 6-cylinder engine)
Main/Crankpin Bearing Clearance0.15 - 0.30 mm (measured with lead wire or feeler gauge, specific to bearing size)
Exhaust Valve Seat Recession0.5 - 1.0 mm (relative to cylinder head surface, before reconditioning is required)
Turbocharger Rotor Axial PlayTypically 0.10 - 0.15 mm (refer to turbocharger manufacturer's manual)
Turbocharger Rotor Radial PlayTypically 0.20 - 0.30 mm (refer to turbocharger manufacturer's manual)

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Complete Fuel Injector (at least one per cylinder type, preferably two)
  • Exhaust Valve Spindle and Seat Ring (one complete set)
  • Full set of Piston Rings for one cylinder
  • Main Bearing Shells (one complete set)
  • Crankpin Bearing Shells (one complete set)
  • High-Pressure Fuel Pipe (one for the Common Rail system)
  • Turbocharger Bearing Cartridge or Repair Kit
  • Essential O-rings and Gaskets for cylinder head, fuel system, and critical pipe connections

Safety

  • High-pressure fuel lines (Common Rail system) operate at extreme pressures (up to 2000+ bar) and pose a severe fire risk if leaks occur; ensure all spray shields are intact and regularly inspected.
  • Hot surfaces (exhaust manifold, turbocharger, cylinder heads) can cause severe burns; verify insulation integrity and ensure proper warning signs and access control.
  • Rotating machinery (flywheel, coupling, crankshaft) presents entanglement and crushing hazards; ensure all guards are securely in place and strict Lock-Out/Tag-Out (LOTO) procedures are followed during maintenance.
  • Potential for crankcase explosions due to oil mist accumulation; ensure the oil mist detector is fully functional and crankcase relief valves are clear and correctly installed.
  • Handling of Heavy Fuel Oil (HFO) involves high temperatures (up to 150°C) and carries risks of burns, spills, and exposure to hazardous substances; proper PPE and spill response procedures are essential.

Class survey

A class surveyor will meticulously review engine logbooks, maintenance records, and oil/water analysis reports to assess the engine's operational history and condition. Key checks include verifying the functionality of all safety devices (overspeed trip, low lube oil pressure/high temperature alarms, oil mist detector, crankcase relief valves). A thorough visual inspection for leaks, general cleanliness, and the integrity of the fuel oil system (including high-pressure piping, shielding, and fire-fighting arrangements) and exhaust gas system (insulation, expansion bellows) is standard. Depending on the survey type (e.g., Special Survey), crankshaft deflection readings may be requested, and specific components like main/crankpin bearings or cylinder units might be opened for inspection based on records or observed conditions. Compliance with SOLAS, MARPOL, and relevant class rules for machinery and environmental protection will be a primary focus.

Estimated lifetime: 60,000 - 90,000 hours before a major overhaul (e.g., crankshaft out, full engine rebuild); with diligent maintenance and component replacement, the total design life can exceed 150,000 - 200,000 running hours.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 4-Stroke.

Other models of the same equipment type, Wärtsilä first.

By manufacturer MAN Energy SolutionsWärtsiläCaterpillarHiMSENMTUVolvo PentaYanmar Power Technology Co., Ltd.HanshinDaihatsuPielstickMaK (Caterpillar)Rolls-Royce / BergenCaterpillar MaKCumminsBaudouinAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Wärtsilä models More like 6W32
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Wärtsilä 6W32 — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.

Service engineer? Write the day report for this 6W32 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.