Main Engine 4-Stroke · Main Engines (4-Stroke)
The Wärtsilä 6W32 is a medium‑speed, 4‑stroke L‑configuration diesel engine delivering up to 2 880 kW at 750 rpm, featuring common‑rail direct fuel injection and turbo‑intercooling for high specific power.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
| Fuel Injector Overhaul | 3,000 - 6,000 running hours |
|---|---|
| Exhaust Valve Overhaul | 6,000 - 12,000 running hours (depending on fuel quality and operating profile) |
| Piston Overhaul (rings, liner inspection) | 12,000 - 18,000 running hours |
| Turbocharger Overhaul | 12,000 - 24,000 running hours (depending on type and operating conditions) |
| Main & Crankpin Bearing Inspection | 24,000 - 36,000 running hours |
| Cylinder Liner Calibration | 12,000 - 18,000 running hours |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Cylinder Liner Wear | Max diameter increase 0.6 - 0.8 mm (measured at the top ring's TDC position) |
|---|---|
| Piston Ring Groove Wear | Axial clearance increase 0.1 - 0.2 mm (specific to ring type and groove) |
| Crankshaft Deflection | Max deviation between adjacent webs < 0.05 mm (refer to Wärtsilä's specific manual for 6-cylinder engine) |
| Main/Crankpin Bearing Clearance | 0.15 - 0.30 mm (measured with lead wire or feeler gauge, specific to bearing size) |
| Exhaust Valve Seat Recession | 0.5 - 1.0 mm (relative to cylinder head surface, before reconditioning is required) |
| Turbocharger Rotor Axial Play | Typically 0.10 - 0.15 mm (refer to turbocharger manufacturer's manual) |
| Turbocharger Rotor Radial Play | Typically 0.20 - 0.30 mm (refer to turbocharger manufacturer's manual) |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
A class surveyor will meticulously review engine logbooks, maintenance records, and oil/water analysis reports to assess the engine's operational history and condition. Key checks include verifying the functionality of all safety devices (overspeed trip, low lube oil pressure/high temperature alarms, oil mist detector, crankcase relief valves). A thorough visual inspection for leaks, general cleanliness, and the integrity of the fuel oil system (including high-pressure piping, shielding, and fire-fighting arrangements) and exhaust gas system (insulation, expansion bellows) is standard. Depending on the survey type (e.g., Special Survey), crankshaft deflection readings may be requested, and specific components like main/crankpin bearings or cylinder units might be opened for inspection based on records or observed conditions. Compliance with SOLAS, MARPOL, and relevant class rules for machinery and environmental protection will be a primary focus.
Estimated lifetime: 60,000 - 90,000 hours before a major overhaul (e.g., crankshaft out, full engine rebuild); with diligent maintenance and component replacement, the total design life can exceed 150,000 - 200,000 running hours.
Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Wärtsilä first.
Tell us what you need for this Wärtsilä 6W32 — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.
Service engineer? Write the day report for this 6W32 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.