OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Navigation & Bridge Equipment› Echo Sounder› Transas Navi-Sailor 4000 ECDIS
Transas

Navi-Sailor 4000 ECDIS

Echo Sounder · Navigation & Bridge Equipment

Class-certified type (DNV register) · technical data sheet not yet verified

Transas Navi-Sailor 4000 ECDIS — Navigation & Bridge Equipment. The supplied category identifies the equipment as Echo Sounder, and it is normally installed on the bridge or in the navigation electronics system with its required external sensor, antenna or hull interface. In that listed role, its primary purpose is to provide bridge personnel and connected systems with vessel rotational or heading-related motion information. Unlike absolute heading sensors, a rate-of-turn indicator emphasizes rotational motion and depends on correctly scaled sensor input. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

TypeECDIS
IMO CompliantYes
Related models

Also in Echo Sounder.

Other models of the same equipment type.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect sensors or antennas, cabling, power supply, processor, display and data interfaces. Compare output with independent bridge references and review recurring alarms or offsets. Verify data distribution to dependent systems. Refer to the manufacturer documentation for the exact figure for calibration, alignment and performance criteria.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry fuses, interface cables, approved power supplies, sensor or antenna parts and supported display or processor modules.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Transas equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Navi-Sailor 4000 ECDIS
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Transas Navi-Sailor 4000 ECDIS — a part, a service call, a second opinion. Are you Transas? Claim this brand page.

Service engineer? Write the day report for this Navi-Sailor 4000 ECDIS in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.