"> Furuno FE-800 Ice-Rated -30C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 103 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Furuno

FE-800 Ice-Rated -30C

Furuno FE-800 Ice-Rated -30C — Navigation & Bridge Equipment. The supplied category identifies the equipment as Echo Sounder, and it is normally installed on the bridge or in the navigation electronics system with its required external sensor, antenna or hull interface. In that listed role, its primary purpose is to provide bridge personnel and connected systems with vessel rotational or heading-related motion information. Unlike absolute heading sensors, a rate-of-turn indicator emphasizes rotational motion and depends on correctly scaled sensor input. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

imo compliant True
variant Ice-Rated -30C

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor, antenna or transducer damage causes unstable, missing or inaccurate navigation data
Power-supply failure causes receiver or display reset and complete loss of output
Cable, connector or interface faults cause intermittent data or loss of signals to dependent systems
Incorrect alignment, calibration or configuration causes persistent disagreement with independent references
Processor or display faults cause frozen values, alarms or unavailable navigation information

Service & Maintenance

Inspect sensors or antennas, cabling, power supply, processor, display and data interfaces. Compare output with independent bridge references and review recurring alarms or offsets. Verify data distribution to dependent systems. Refer to the manufacturer documentation for the exact figure for calibration, alignment and performance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuses, interface cables, approved power supplies, sensor or antenna parts and supported display or processor modules.
Equipment Model #142256 · ✓ still in production