Standard 22 Gyrocompass
Raytheon Anschuetz Standard 22 Gyrocompass is identified in the source list as a gyrocompass. It is installed on the bridge and at the associated sensor location, with outputs distributed to connected navigation equipment as required. Its purpose is to provide the vessel navigation parameter indicated by the category for bridge use and connected systems. The source record provides no additional model-specific operating figure beyond the listed designation and category. Sensor principle, correction methods, interfaces and redundancy depend on the exact model and vessel installation. The exact model designation distinguishes sensing technology, interfaces and accuracy class from neighboring instruments; refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Compare the indicated value with independent references and investigate persistent disagreement rather than applying unrecorded corrections. Inspect sensors, cabling, power supplies, repeaters and network interfaces applicable to the installed equipment. Verify alarms and data outputs to radar, ECDIS, autopilot and voyage-data systems where connected. Keep calibration or configuration records current as appropriate to the sensor type. Protect exposed sensors from paint, deposits and water ingress. Refer to the manufacturer documentation for the exact figure for test, calibration and alignment procedures.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →