"> Hatecke Hatecke Totally Enclosed Lifeboat 120P Diesel Outboard-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 4 verified suppliers & service companies for Hatecke in the Maritime Network Find suppliers →
Hatecke

Hatecke Totally Enclosed Lifeboat 120P Diesel Outboard-C

Hatecke Hatecke Totally Enclosed Lifeboat 120P Diesel Outboard-C is listed as a Totally Enclosed Lifeboat (TELB) within the Lifeboats category. It is typically installed at assigned embarkation or launching stations on open deck, with securing, release and launching arrangements matched to the appliance type. Its engineering role is to provide abandonment, rescue or personal-survival capability when the vessel cannot remain safely occupied. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity persons 120
engine Diesel Outboard
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Corrosion or mechanical damage to securing and release parts can impair launching, found as seized, deformed or heavily corroded components
Degraded seals, fabric, buoyancy or enclosure components can compromise readiness, seen as damage, leakage or failed service inspection
Expired or deteriorated survival-equipment contents can leave the appliance non-compliant, found during inventory or service checks
Battery, lighting or communication-device failure can reduce emergency functionality, noticed during scheduled tests
Poor stowage, obstruction or incorrect lashing can delay deployment, found during deck inspection or drills

Service & Maintenance

Inspect stowage, securing, release arrangements, access, markings and the physical condition of the appliance and its emergency equipment. Confirm service dates and certificates match the vessel’s safety records. Any load, pressure, inflation or replacement limits must be taken from approved maker documentation and statutory service instructions.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry only approved onboard-replaceable items such as lights, batteries, lashings, seals and designated survival-equipment consumables; major life-saving appliance servicing is normally handled by authorized service facilities.
Equipment Model #139909 · ✓ still in production