"> TTS Marine TTS Marine DC 5t/40m-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
TTS Marine

TTS Marine DC 5t/40m-C

TTS Marine TTS Marine DC 5t/40m-C is listed as a marine deck crane in the Deck Cranes / Deck Crane category. Equipment of this class is typically installed on an exposed deck, cargo deck, offshore work area, or provision-handling station close to the loads it is intended to handle. Its shipboard purpose is to lift, lower, slew, luff, or transfer cargo, stores, equipment, or offshore loads within the crane's approved operating envelope. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

lifting capacity t 5
boom reach m 40

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Hydraulic leakage, low pressure, pump wear, or control-valve faults cause slow, jerky, or weak crane movements
Wire-rope, sheave, drum, bearing, or structural wear from load cycles and corrosion causes visible damage, noise, poor spooling, or increased play
Brake or holding-device wear causes load creep, slipping, or inability to hold position
Limit switch, encoder, load sensor, interlock, or control-system faults cause restricted movement, nuisance shutdowns, or loss of automatic functions
Corrosion, damaged hoses or cables, loose fasteners, or foundation defects from deck exposure create leakage, unreliable controls, or structural concerns

Service & Maintenance

Inspect structural members and foundations, wire ropes, drums and sheaves, brakes, hydraulic hoses and cylinders, lubrication points, guards, emergency stops, limit devices, load indication where fitted, and local/remote controls. Load tests and acceptance criteria must follow class, flag, vessel, and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical spares include hydraulic seals and hose items, brake components, wire-rope accessories, bearings or bushes, limit switches, sensors, solenoids, and critical electrical control parts.
Equipment Model #137121 · ✓ still in production