⚓ Working on this equipment?

Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.

Start free — 14 days →

No credit card required

🔧 134 verified suppliers & service companies for R.M. Young in the Maritime Network Find suppliers →

Is R.M. Young your company? Claim this page

R.M. Young

R.M. Young Pyranometer Marine-C

Name: R.M. Young R.M. Young Pyranometer Marine-C
Brand: R.M. Young
SKU: OSE-136407

R.M. Young R.M. Young Pyranometer Marine-C is identified in the source list as a weather station / anemometer. It is normally installed or arranged in the bridge and associated sensor or antenna location. Its purpose is to provide the listed navigation, recording, identification, depth, weather or visual-monitoring function. The source record provides no additional model-specific operating figure beyond the listed designation and category. The equipment is based on sensors, antennas, processors, displays and network interfaces. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

type Pyranometer Marine

marine grade True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Sensor, antenna or transducer fault caused by damage, fouling, water ingress or electronics failure, resulting in missing, unstable or implausible navigation data

●Power-supply failure caused by breaker, converter or wiring faults, resulting in loss of indication or repeated restarts

●Network or interface failure caused by damaged cabling, port faults or configuration changes, resulting in loss of data to connected bridge systems

●Display, processor or control failure caused by hardware or software faults, resulting in frozen, blank or unavailable functions

●Calibration, alignment or configuration error caused by incorrect setup or maintenance, resulting in persistent disagreement with independent references

Service & Maintenance

Compare indicated data and system response with independent references and investigate persistent disagreement. Inspect sensors, antennas, cabling, power supplies, displays and network interfaces applicable to the installation. Verify required alarms and outputs to connected bridge systems using approved procedures. Back up configuration before authorized software or hardware changes. Protect exposed sensors and antennas from paint, deposits and water ingress. Refer to the manufacturer documentation for the exact figure for test, calibration, alignment and recovery procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents

🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →

🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep fuses, selected power-supply and interface modules, cables or connectors and manufacturer-recommended sensor or electronic spares. Replacement core units must remain compatible with the approved bridge installation. Preserve calibration, identity and configuration data.

Working on this unit?

Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.

Need a service partner for R.M. Young?

114,000+ shipyards, suppliers and service companies in the Maritime Network directory.

Equipment Model #136407 · ✓ still in production