Echo Sounder · Navigation & Bridge Equipment
JRC (Japan Radio Co) JFE-200kHz-C is identified in the source list as a marine echo sounder. It is installed on the bridge and at the associated antenna, transducer, camera or sensor location, with data distributed to connected ship systems as required. Its purpose is to measure water depth beneath the vessel using an acoustic transducer and bridge display. The source record provides no additional model-specific operating figure beyond the listed designation and category. The exact sensor set, recording functions, data interfaces, approval status and redundancy depend on the installed model. The exact model designation distinguishes sensing, recording or communication capability from neighboring bridge equipment; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, JRC (Japan Radio Co) first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect sensors, antennas, transducers, cameras, cabling, power supplies and network interfaces applicable to the installed equipment. Compare displayed information with independent references where possible and investigate recurring alarms or missing channels. Verify required outputs to other bridge systems and preserve configuration before approved software or hardware maintenance. Clean exposed sensors and optical surfaces without damaging coatings or seals. Check backup power or recording arrangements where applicable. Refer to the manufacturer documentation for the exact figure for test, calibration, update and recovery procedures.
Keep fuses, selected power-supply and interface modules, cables or connectors, storage media where applicable and manufacturer-recommended sensor or electronic spares. Replacement core units must remain compatible with the approved bridge installation. Preserve configuration and recorded setup data.
Free of charge — we forward your request to qualified suppliers for JRC (Japan Radio Co) equipment from our network of over 114,000 maritime companies.
Tell us what you need for this JRC (Japan Radio Co) JFE-200kHz-C — a part, a service call, a second opinion. Are you JRC (Japan Radio Co)? Claim this brand page.
Service engineer? Write the day report for this JFE-200kHz-C in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.