"> Survival Systems International Survival Systems International Gravity SWL-15t-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 17 verified suppliers & service companies for Survival Systems International in the Maritime Network Find suppliers →
Survival Systems International

Survival Systems International Gravity SWL-15t-B

Survival Systems International Survival Systems International Gravity SWL-15t-B is listed as a Gravity Davit within the Davits category. It is typically installed at a designated boat or liferaft embarkation station on open deck, attached to the vessel’s structure. Its engineering role is to launch and, where applicable, recover survival craft or rescue boats in a controlled manner. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

swl t 15
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Wire, sheave or bearing deterioration can impair lowering, noticed as rough movement, corrosion or abnormal noise
Brake wear or contamination can affect controlled descent, seen as slip or inconsistent lowering speed
Hydraulic or stored-energy faults can prevent slewing or outreach, seen as slow, weak or unavailable operation
Limit-switch or interlock faults can stop the launch sequence or give incorrect status
Structural corrosion or damaged foundations can compromise load path integrity, found during inspection

Service & Maintenance

Inspect wires, falls, sheaves, brakes, winches, hooks, hydraulic equipment, structure and release interfaces. Confirm operational movement and safety-device function in accordance with approved testing procedures. Load-test values, discard criteria and service intervals must follow statutory and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved brake, wire/fall-related consumables, hydraulic seals/hoses, limit switches and manufacturer-recommended winch or control parts.
Equipment Model #134487 · ✓ still in production