OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Safety & LSA› Davits› Gravity Davit› d-i davit international-hische Gravity SWL-12t-B

Gravity SWL-12t-B

Gravity Davit · Davits

Class-certified type (DNV register) · technical data sheet not yet verified

d-i davit international-hische d-i davit international-hische Gravity SWL-12t-B is listed as a Gravity Davit within the Davits category. It is typically installed at a designated boat or liferaft embarkation station on open deck, attached to the vessel’s structure. Its engineering role is to launch and, where applicable, recover survival craft or rescue boats in a controlled manner. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Safe Working Load (t)12
SOLAS ApprovedYes
Related models

Also in Gravity Davit.

Other models of the same equipment type, d-i davit international-hische first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect wires, falls, sheaves, brakes, winches, hooks, hydraulic equipment, structure and release interfaces. Confirm operational movement and safety-device function in accordance with approved testing procedures. Load-test values, discard criteria and service intervals must follow statutory and manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry approved brake, wire/fall-related consumables, hydraulic seals/hoses, limit switches and manufacturer-recommended winch or control parts.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for d-i davit international-hische equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All d-i davit international-hische models More like d-i davit international-hische Gravity SWL-12t-B
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this d-i davit international-hische Gravity SWL-12t-B — a part, a service call, a second opinion. Are you d-i davit international-hische? Claim this brand page.

Service engineer? Write the day report for this Gravity SWL-12t-B in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.