"> Carboline Carboline FR-90min
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 19 verified suppliers & service companies for Carboline in the Maritime Network Find suppliers →
Carboline

Carboline FR-90min

Carboline Carboline FR-90min is listed as a marine fire retardant coating in the Paint & Coating Systems / Fire Retardant Coating category. Equipment of this class is typically installed on the designated hull, tank, deck, topside, boot-top, ballast, or fire-protected surface specified by the vessel coating scheme. Its shipboard purpose is to protect steel or other substrate from corrosion, fouling, chemical attack, weathering, or fire exposure according to the coating type. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

fire rating min 90
type Intumescent

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Poor surface preparation leaves rust, salts, oil, or dust beneath the coating and causes early blistering, delamination, or underfilm corrosion
Mechanical damage from impact, abrasion, cargo, or maintenance exposes the substrate and produces localized corrosion
Incorrect application conditions or film build cause pinholes, runs, cracking, incomplete cure, or weak adhesion
Chemical, UV, immersion, or temperature exposure beyond the coating capability causes softening, chalking, discoloration, or erosion
Ageing and repeated maintenance create incompatible layers or weak interfaces that peel during inspection or cleaning

Service & Maintenance

Inspect coating continuity, adhesion condition, rusting, blistering, cracking, mechanical damage, weld and edge coverage, and areas exposed to standing water or cargo. Surface preparation, environmental limits, dry-film thickness, curing, and compatibility must follow the approved coating specification and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep compatible primer, topcoat or repair material from the approved coating system, together with manufacturer-specified thinners, fillers, and repair consumables; do not substitute unapproved products.
Equipment Model #133251 · ✓ still in production