SL 600kNm Ram
Rexroth / Bosch SL 600kNm Ram is a shipboard unit in the Autopilot & Bridge Systems group, classified in the source as Heading Control System. It is normally installed at the bridge steering console with control/feedback components connected to the steering gear. Its primary duty is to maintain or control vessel heading by processing heading commands and actuating the steering system. In service it interfaces with gyro or heading sensors, rudder-angle feedback, steering gear, control network, bridge selectors and alarms. Compared with neighboring entries in the same product family, this record is the exact Rexroth / Bosch SL 600kNm Ram variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Verify heading inputs, rudder feedback, steering modes, changeover/interlocks, alarms, controller health and power supplies; conduct steering and autopilot functional tests under safe operating conditions.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →