Navtex Receiver · Navigation & Bridge Equipment
ICS Electronics NAV7 is a GMDSS NAVTEX receiver. It is normally installed on the bridge or in the radio/navigation console with an external antenna and ship power connection. Its primary purpose is to automatically receive maritime safety information such as navigational warnings, meteorological warnings and search-and-rescue information. Unlike two-way GMDSS radios, NAVTEX is primarily a broadcast reception service and therefore depends on correct station, message-category and antenna configuration rather than transmitter performance. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Check antenna and feeder condition, power supply, time and station configuration, message filters and the ability to receive and display current broadcasts. Review stored messages for unexplained gaps. Test alarms and backup power where fitted. Exact receiver test procedures and regional station settings must follow approved documentation.
Carry printer consumables where applicable, fuses, approved power-supply parts, antenna connectors and selected display or control spares where vessel support policy justifies them.
Free of charge — send us your request for ICS Electronics equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, ICS Electronics first.
Tell us what you need for this ICS Electronics NAV7 — a part, a service call, a second opinion. Are you ICS Electronics? Claim this brand page.
Service engineer? Write the day report for this NAV7 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.